Got Questions? We've Got You Covered.
From product specs to delivery logistics, our team is here to help with fast answers and real support.
Frequently Asked Questions
At Lane Enterprises, we understand that every project is unique — and that clear, timely information is critical to keeping things moving. Whether you’re planning a complex stormwater system, sourcing structural plate, or navigating regional installation guidelines, we’re here to help.
With decades of expertise in manufacturing corrugated metal and plastic drainage solutions, structural plate, and allied products, we serve contractors, engineers, municipalities, and distributors across the country. From coast to coast, our team is committed to delivering quality, consistency, and responsive support — because at Lane, every employee has a stake in your success.
Below, you’ll find answers to some of the most common questions we receive. If you don’t see what you’re looking for, just reach out. A local Lane representative is always ready to assist.
For your convenience, our FAQ’s are divided into the following categories:
• General Capabilities & Product Info
• Logistics & Delivery
• Locations, Hours & Service Area
• Applications & Project-Specific Questions
• Website Resources & Tools
General Capabilities & Product Info
Yes. We produce both corrugated metal pipe (CMP) and high-density polyethylene (HDPE) plastic pipe, offering coast-to-coast consistency with the convenience of combining multiple pipe types in a single shipment — saving time and lowering your total delivery cost.
We produce CMP up to 144 inches in diameter at many of our facilities. For large-scale projects, our mobile mill production team may be able to support diameters over 20 feet. Contact your local Lane representative for region-specific capabilities.
Stocked pipe sizes vary by facility and demand. As a general guideline:
- CMP: 6" – 144"
- HDPE: 4" – 60" (typical)
- Polypropylene Pipe: 12" – 60"
- Call your local Lane representative for the most accurate inventory in your area.
Yes, slotted drain options are available for roadway and surface drainage applications.
We produce CMP up to 144 inches in diameter at many of our facilities. For large-scale projects, our mobile mill production team may be able to support diameters over 20 feet. Contact your local Lane representative for region-specific capabilities.
Most facilities stock:
- CMP: 6" – 48" in 20-ft lengths; 54" – 96" in 25- to 30-ft lengths
- HDPE: 4" – 60" in 20-ft lengths, with additional length options for smaller diameters (including 100- and 250-ft coils in single-wall pipe)
- Polypropylene Pipe: 12" – 60"
WILL NEED TO CONFIRM SIZING
Yes. Custom cuts are available across both CMP and HDPE products. Cutting charges may apply depending on project type and pipe type. Please consult your local Lane team for tailored quotes.
Lane produces pipe using galvanized, aluminized, poly-coated, aluminum, and asphalt-coated steel options. Availability varies by region.
Lane manufacturing facilities are equipped for custom fabrication. We support inlets, risers, flared end sections, specialty fittings, and complex design requirements.
Logistics & Delivery
Yes. Lane owns and operates a dedicated fleet of delivery trucks at many of our facilities. This allows us to control logistics and scheduling — ensuring your materials arrive where and when they’re needed.
Lead times vary by facility, product, and current demand. Contact your local Lane location with your required delivery date, and we will do everything we can to meet your timeline.
Load size varies by pipe diameter, length, and configuration. Contact your Lane representative for a current load chart tailored to your order.
Locations, Hours & Service Area
Lane Enterprises operates 18 manufacturing and coating facilities across the country — with coast-to-coast reach. We also have additional stocking and support locations. Find your nearest location at *link to Find A Rep Near You feature*.
Most Lane facilities operate between 7:00 a.m. – 3:30 p.m. Hours may vary slightly by location and season. Please contact your nearest location to confirm.
Yes. Contractors, municipalities, and the public are welcome. Call or visit your nearest Lane facility for more information.
Applications & Project-Specific Questions
This varies by municipality and site requirements. Contact your local Lane team or public works department for guidance.
Yes. These are typically cut from leftover stock pipe and availability varies by location. Call your local Lane location to check inventory.
Yes. Lane offers corrugated pipe, structural plate, StormKeeper™ chambers, gabions, geotextiles, and complete solutions for stormwater management.
Yes. Lane offers a full line of fittings, bands, and seals, including watertight connections for a variety of product types and materials.
Refer to the fill height charts available in our Resource Library, or contact your Lane representative with your project specifics.
Yes. We can combine pipe orders with a wide range of accessories and support products — including end sections, storm chambers, grates, flashboard risers, and more.
Yes. We offer StormTite® pipe made with recycled-resin in select sizes. Contact your Lane representative for details.
Other Questions
Yes. Visit our Resource Library for free tools, specification sheets, and technical documents.
In many cases, yes. We offer universal adapters or fittings when required. Please consult with your Lane representative for compatibility.
These are available in our downloadable product catalogs in the Resource Library.
Yes. Our team includes experienced engineers and product specialists who regularly assist customers with technical questions, design considerations, and regulatory compliance. We can provide submittals, structural calculations, spec sheets, and other documentation needed to move your project forward with confidence.
Yes, we provide CAD files, standard product drawings, and technical resources upon request. For select products, we also have BIM content available. Visit our Resource Library or contact your local representative for access.
Our online Resource Library includes technical brochures, installation guides, specification sheets, submittal packages, design tools, and load charts. These are all available for free download on our website. If you need something not listed, reach out — we’re happy to help.
Refer to the fill height charts available in our Resource Library, or contact your Lane representati
Absolutely. Lane routinely partners with engineers and contractors to propose alternate solutions that meet project specs while optimizing cost, installation time, or hydraulic performance. We’re happy to support VE submittals, spec comparisons, and alternate product reviews with local agencies or DOTs.
ve with your project specifics.
Yes. While Lane does not install products directly, we provide comprehensive installation guidelines and can offer on-site or virtual product training sessions upon request. For certain solutions like StormKeeper™ chambers or structural plate systems, we can coordinate with contractors during key phases to ensure proper installation.
Lane's plastic pipe products, including StormTite® HDPE and PRO100® PP, meet AASHTO and ASTM standards and are approved for use on many DOT-qualified project lists. Please contact your local Lane representative for state-specific approvals and documentation.
Yes. Our engineering team can supply load rating tables, minimum and maximum fill charts, and sealed calculations for structural plate culverts, arches, and long-span bridge applications. We also assist with custom solutions for deep fill or live load conditions.
Many of Lane’s solutions — such as HDPE pipe made with recycled resin or StormKeeper™ stormwater chambers — can contribute to LEED points or other green infrastructure goals. We can help assess product qualifications based on your project’s sustainability objectives.
You can find your nearest Lane representative using our Find Your Rep tool on our locations page. Our team is organized by region to ensure fast, informed support from someone who knows your local regulations and project needs.
