The Application

StormKeeper™ Stormwater Chambers maximize the underground storage potential where available storage depth is limited, but still provide great flexibility with minimum and maximum cover heights of 2 and 8 feet, respectively. Used primarily beneath paved areas to preserve usable real estate, they also find application in green spaces for Low Impact Development (LID) practices.

Lane provides the complete product line to meet all your HDPE drainage needs - the full range of diameters, single-wall and dual-wall productions, options for standard perforated patterns, and custom fabricated fittings. Lane’s HDPE pipe offerings can meet all the subsurface drainage demands of your site, building, roads and pavements. Whether made from prime virgin resins or with recycled materials, Lane’s HDPE pipe has the strength and service life needed for your project.

Steel and aluminum pipe is available in a variety of corrugations and wall thicknesses in diameters up to 144”. Corrugated steel pipe (CSP) is available in several protective coatings to provide design service life, while aluminum pipe does not require protective coating. These choices allow designers to economically match the best material to the site conditions.

Corrugated metal pipe (CMP) and spiral rib pipe (SRP) are available in four different material types to economically meet the environmental and service life conditions defined for each installation.

The Lane StormKleener Filter Cartridge System is a storm water treatment device consisting of one or multiple cylindrical media-filled cartridges housed in a containment or carrier vessel. The containment vessel can be constructed from any appropriate material including corrugated metal pipe, plastic pipe, or a reinforced concrete vault. The Lane StormKleener Filter Cartridge System is a passive flow-through filtration system that filters and cleans storm water to provide an exceptional pollutant removal during storm events while providing a naturally occurring backwash to enhance and extend the life of the cartridge.

The StormKeeper™ Sediment Strip is an NJCAT verified water quality treatment device that can easily be incorporated into any system layout by providing three additional features to a designated row of chambers:

Flow Diversion -The initial storm water flows from a rain event (i.e. the first flush) are routed directly to the Sediment Strip via a small manhole or drain basin with an integrated diversion weir, allowing storm water to first fill the designated row before overtopping the weir and spilling over into the remaining rows.

One of the most challenging aspects of any site development design is the control of post-development stormwater flows. The Lane StormShaper is designed to release stormwater from a system at an optimal rate (the rate allowed by local regulations), including multiple storm requirements. The ideal outlet hydrograph will often be a series of jumps in the outlet rate, with each jump corresponding to the transition between one design storm and the next. This means that, as opposed to conventional systems, the storm water will be released at a higher rate early in the storm event.

The StormShaper system will allow the designer to ‘shape’ the actual outlet hydrograph to conform to the ideal outlet strategy. The result is that the detention system can be reduced in size by an average of 30 to 40 percent when compared to conventional outlet designs

Counter Flow Technology (CFT) water quality unit, is a cost-effective and eco-friendly structural BMP designed to meet the permit requirements of the NPDES Phase II program by treating the “first flush” of a given storm event. Lane’s CFT provides a mechanism to intercept stormwater flow, remove pollutants, and re-introduce treated flow in a manner suitable for today’s stormwater regulators. Lane’s CFT is manufactured from high-quality corrugated HDPE pipe and has no mechanical, moving or replacement parts, is less costly, more reliable and offers better efficiency than comparable products. 

Lane’s Corrugated Metal Pipe Sand Filter (CMPSF) provides a mechanism to intercept storm water flow, remove pollutants, and discharge treated flow in a manner suitable for today’s storm water regulators. Ever-changing storm water regulations continue to emphasize the importance of Best Management Practices to address water quality issues and associated mandates set forth by the EPA. Simply put, the Corrugated Metal Pipe Sand Filter is a tried-and-true means of providing treatment that not only meets the EPA’s standard for treating the “first flush,” but serves as the performance benchmark for other types of water quality devices.

Help protect the quality of our waterways and adhere to EPA-mandated controls to reduce pollutant loads with the Reverse Q Pond Outlet. The Reverse Q addresses both water quality and water quantity by utilizing a floating orifice that draws discharge water from the top of the sediment pond where the water is clearest throughout the storm event.

The Lane Constant Q Pond Outlet (CQ) is a unique and extremely cost effective storm water BMP which significantly improves the quality of the water being discharged from ponds. The CQ is a constant discharge device that draws water from the highest level of a pond, insuring that only the cleanest water is discharged.